The contactor is a direct moving double breakpoint structure, the contact system is divided into two layers, and the upper layer has three pairs of current limiting contacts and current-limiting resistance consist of inrush current device. When it is closed, it is connected to the work contact after several milliseconds, and the permanent magnetic block in the current limit contact is released by the spring reaction. Disconnect the current-limiting resistor to make the capacitor work properly and the contactor internal circuit connection diagram (see figure 3). CJ19-25~43 have two auxiliary contacts, CJ19-63~95 have three auxiliary contacts. For CJ19-25~43, Screws are available for installation, as well as the 35mm standard din rail. For CJ19-63~95, 35mm or 75mm standard din rail can be mounted are available for installation. Photo 3 Example:CJ19-63/21,95/21
Ordering Instructions
When placing an order,you should point out the below: Model, rated operational voltage and frequency of coil and quantity Example:Changeover capacitor contactor CJ19-32/11 AC 220 50Hz 500PCS CJ19-63~95 CJ19-25~43
Item
Voltage
CJ19-25
CJ19-32
CJ19-43
CJ19-63
CJ19-95
Electrical life 104
10
10
10
10
10
Rated current (380v)A
17
23
29
43
63
Controllable capacity (kvar)
220v
6
9
10
15
22
380v
12
18
20
30
44
Rated insulating voltage (V)
500
500
500
500
500
Surge limiting capacity
20le
20le
20le
20le
20le
Operating conditions
Absorbing (85%-110%)US release (20%~75%)Us
Coil burden (start up /lasting )VA
70/8
110/11
110/11
200/20
200/20
Control capacity of auxiliary contact
AC 15 360VA DC-13 33W
Weight
0.44
0.63
0.64
1.4
1.5
Contactor model
A max
B max
C max
D max
E
F
Notes
CJ19-25
80
47
124
76
34/35
50/60
Screw mounting and 35mm railway available
CJ19-32
90
58
132
86
40
48
CJ19-43
90
58
136
86
40
48
CJ19-63
132
79
150
Except for screw mounting ,also can use 35 70mm railway available
CJ19-63~95 CJ19-25~43
